AeroNaut Helix 2840mm Span

AeroNaut Helix 2840mm  Span

Helixx is an elegant 6-flap glider for relaxed flying on slopes and on flat terrain. It can be built as a glider or as an electric glider. The GRP hull and the enclosed template for cutting off the fuselage nose offer both options.

The wing is created in the tried and tested aero-naut manner in a slipway, which enables secure positioning of all components and a distortion-free structure. The wing is partially paneled and offers attractive visual design options depending on the choice of covering material. The six large flaps can be programmed as desired and allow different flight states to be set, depending on the pilot's taste. The 90° brake flaps are a reliable descent and landing aid; Their effect can be further improved by combining them with the ailerons.

The energy requirement of the model is low. A 3S LiPo with a capacity of 2,400 mAh can easily be accommodated and enables numerous climbs at good starting altitudes to search for thermals.

Helixx is a model that is not only fun for model pilots. Building the model with its precisely laser-cut components is a lot of fun and makes you look forward to beautiful flights in the evening thermals or in light winds on a slope.

To control the rudders you need a total of 8 servos (6 x AN-12-MGBBA order no. 7003/74 and 2 x AN-8-MGGBD order no. 7003/71).

The kit contains:

All laser-cut wooden parts required for construction, white GRP fuselage and canopy, linkage parts, various small parts, 3D construction instructions, construction slipway.

Technical data: