RF Module TM-18 & 9001RX 920MHz for 32MZ 16IZ

RF Module TM-18 & 9001RX 920MHz for 32MZ 16IZ

Features

・Adopts 920MHz band spread spectrum method

- The transmitter's unique ID code prevents interference from other AdRCSS 920MHz systems.

・Failsafe function (3ch only)

 Recommendation

・Receiver equipped with FDLS-1, DLPH-1 or dual Rx link system (R7308SB, R7208SB, etc.)

　Please use the AdRCSS 920MHz system as a backup for the 2.4GHz system.

*Due to differences in communication speed between each system, there may be slight differences in operation after switching. This is not abnormal.

Compatible transmitters T32MZ T18SZ T16IZ T16IZS *T16SZ *T12K

*T16SZ and T12K do not have a power supply on the CRFS connector, so a separate power supply is required.

accessories

・TM-18 RF module

・R9001SB

・CRSF signal connection cable

·double-sided tape

・T32MZ mounting stay

specification

TM-18 RF module

・AdRCSS 920MHz system/maximum 16Ch (depending on transmitter settings)

・Communication method: One-way communication (telemetry not supported)

・Can be used simultaneously with all Futaba 2.4GHz systems (FASSTest 18ch/12ch, FASST MULTI/7ch, S-FHSS, T-FHSS)

・Current consumption: 36mA (maximum)

・Equipped with power down mode (low output mode)

How to use each transmitter

- Can be used by connecting to T32MZ CRSF connector.

・T18SZ, T16IZ, T16SZ, T12K　

　Please turn on CRSF mode. At this time, S, BUS servo settings cannot be made.

*It cannot be used overseas due to radio laws in each country.